Transmission Range Sensor: Installation

Place transaxle in Neutral. Install TR sensor. Install 2 retaining bolts hand tight. Adjust TR sensor. See ADJUSTMENT under ADJUSTMENTS. Ensure TR sensor electrical connector is connected. Position manual control lever into place and tighten manual control lever nut to specification. See TORQUE SPECIFICATIONS .
Install shift cable and bracket and tighten nut to specification. Connect air temperature sensor connector and MAF sensor connector. Place data link connector back into original position. Install fresh air duct and air cleaner assembly. Reconnect negative battery cable. Ensure vehicle starts only when gearshift lever is in "P" and "N" positions.