FixVault
Home › Kia › 2003 › Sorento EX, 4WD, Part Time › Repair and Diagnosis › Body & Frame › Body, Cab Control Systems › Electronic Time & Alarm Control System › ETACS Module › Removal And Installation

Removal And Installation

  1. Disconnect the negative (-) battery terminal.
  2. Remove the audio unit. See REMOVAL AND INSTALLATION .
  3. Remove the 2 nuts holding the ETACS module and disconnect the connectors.
    Fig 1: Removing the ETACS Module
    G01140447Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault