FixVault
Home › Kia › 2004 › Optima EX, 2.4 6 › Repair and Diagnosis (Single Page) › Body & Frame › Body, Cab Control Systems › ETACS (Electronic Time & Alarm Control System) › Electronic Time And Alarm Control Module › Removal And Installation

Removal And Installation

  1. Disconnect the negative (-) battery terminal.
  2. Remove the lower crash pad. See GAUGES & INDICATORS .
  3. Remove the bolts holding the ETACS module and disconnect the connectors.
    Fig 1: Disconnecting ETACS Module Connectors
    G01100696Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault