Check FLS

IG KEY: OFF, Engine: OFF
Disconnect FLS connector C-03.

Check resistance between terminals 1 and 3 of FLS connector when fuel is added or subtracted.

Specification:

FLS SPECIFICATION REFERENCE CHART

FLS	Normal Parameter
Float position	Full gauge	3/4	1/2	1/4	Empty gauge
Resistance	8Ω	30Ω	54.5Ω	98Ω	200Ω
Fuel volume	71.3l	52.5l	37.5l	22.5l	5.6l

(Above specification's error range is ±2Ω.)

Is the FLS normal?
YES
1. FLS is OK.
2. Possibility of PCM malfunction.
3. Test with a new PCM and check for proper operation. If problem is corrected replace PCM and go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
1. Repair or replace it. Then go to "VERIFICATION OF VEHICLE REPAIR " procedure.