FixVault
Home › Kia › 2004 › Sorento EX, 4WD, Part Time › Repair and Diagnosis › Engine Performance › Specifications › Fuel System & Fault Isolation › MFI Control System › Idle Speed Control Actuator › Actuator Inspection

Actuator Inspection

  1. Disconnect the connector at the idle speed control actuator.
  2. Measure the resistance between terminals.

    Standard value at terminal 1-3, 4-6: 3650-39500 ohms at 20°C (68°F)

    Fig 1: Idle Speed Control Actuator Resistance Test Procedure
    G00340421Courtesy of KIA MOTORS AMERICA, INC.
  3. Connector the connector to the idle speed control actuator.
About FixVault