Verification of Vehicle Repair
WARNING: This page is about a different car, the 2004 Kia Rio. However, it is still accessible from the selected car via links, so may be relevant.
After a repair, it is essential to verify that the fault has been corrected.
- Monitor and record the Freeze Frame Data for the Diagnostic Trouble Code (DTC) which has been diagnosed.
- Using a Scantool, Clear DTC.
- Operate the vehicle within conditions noted in the freeze frame data or enable conditions.
- Monitor that all readiness test have been verified as "Complete".
- Are any DTCs present?
YES
- Go to the applicable troubleshooting procedure.
NO
- System is performing to specification at this time.