Output Shaft: Disassembly

Remove the taper roller bearing, fourth output gear, spacer, third output gear, second speed gear assembly with second gear sleeve and needle roller bearing, first speed gear assembly with needle roller bearing and spacer and steel ball using the special tool (09432-33200).

Fig 1: Disassembling Output Shaft
Courtesy of KIA MOTORS AMERICA, INC.
Remove the rear taper roller bearing using the special tool (09432-21400).
CAUTION: Do not reuse the bearing removed from the shaft.

Fig 2: Removing Rear Roller Bearing From Output Shaft
Courtesy of KIA MOTORS AMERICA, INC.