DTC C1513 Brake Switch Error: DTC Detecting Condition
DETECTING CONDITION AND POSSIBLE CAUSE
| Item |
Detecting Condition |
Possible cause |
| DTC Strategy |
|
- Open or short of brake light switch circuit
- Faulty brake light switch
|
| Monitoring Period |
- Continuous (once per loop)
|
| Enable Conditions |
- This code is set if the BLS is continuously active for more than 6 minutes when driving faster than 20 kph.
- This code is set if no signal change from inactive to active brake light switch was detected after three cycles of acceleration up to a vehicle speed higher than 40 kph and deceleration down to a vehicle speed lower than 3 kph.
|
| Fail Safe |
- The ABS/EBD/TCS/ESC functions are not inhibited. Fault recording for diagnostic purpose occurs immediately.
- The ABS/EBD/TCS/ESC warning lamps are not activated.
|