Steering Wheel Angle Speed Sensor: Installation

Tighten the four mounting bolts after installing the clockspring and steering wheel angle sensor.
CAUTION: Turn clockspring and angular sensor to the end of both direction, return to the opposite direction two and a half rounds.
Install the steering wheel after aligning clockspring and angle sensor to be ' > < 'form.

Fig 1: Locating Clockspring Mounting Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Install the steering wheel.
Tighten the steering wheel nut.
Tightening torque : 40~50 N.m (4.0~5.0 kgf.m, 28.9~36.9 lb-ft)

Fig 2: Locating Steering Wheel Bolt
Courtesy of KIA MOTORS AMERICA, INC.
Tighten two bolts after installing the air module.
Tightening torque : 8~11 N.m (0.8~1.1 kgf.m, 5.6~7.0 lb-ft)

Fig 3: Locating Steering Wheel Cover Bolts
Courtesy of KIA MOTORS AMERICA, INC.