FixVault
Home › Kia › 2007 › Amanti › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel Delivery System › Accelerator Pedal › Removal

Accelerator Pedal: Removal

  1. Turn ignition switch off, disconnect the negative (-) battery cable.
  2. Disconnect the accelerator position sensor connector (A).
  3. Remove the acceleration pedal assembly after unscrewing 3 mounting bolt (B).
    Fig 1: Disconnecting Accelerator Position Sensor Connector & Mounting Bolts
    G05116641Courtesy of KIA MOTORS AMERICA, INC.
About FixVault