Console Box Light: Inspection

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT CONSOLE BOX LIGHT

Remove the console box light.
Measure the voltage of the connector.

Standard voltage

SPECIFIED CONDITION AND TESTER CONNECTION

Tester Connection	Condition	Specified Condition
J46-2 - J46-1	Clove box is opened	10 to 14 V
J46-2 - J46-1	Glove box is closed	Below 1 V

Fig 1: Identifying Console Box Light Connector Terminal

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

If the result is not as specified, repair or replace wire harness or connector.

Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
Check that the console box light comes on.

OK:

Comes on

If the result is not as specified, replace the console box light.

Fig 2: Connecting (+) Lead From Battery To Terminal 2 And (-) Lead To Terminal 1

Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.