FixVault
Home › Kia › 2007 › Magentis 2.4 3 › Repair and Diagnosis › External Pages › Different car › Section 50 (Lighting) › Stop Light Switch › Installation

Stop Light Switch: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL STOP LIGHT SWITCH ASSEMBLY (See  INSTALLATION  ) 
  2. INSTALL DRIVER SIDE KNEE AIRBAG ASSEMBLY (See  INSTALLATION  ) 
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (See Step 24 in  INSTALLATION  ) 
  4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See Step 25 in  INSTALLATION  ) 
  5. INSTALL SIDE INSTRUMENT PANEL LH (See Step 26 in  INSTALLATION  ) 
  6. INSTALL FRONT DOOR OPENING TRIM COVER LH (See Step 27 in  INSTALLATION  ) 
  7. INSTALL FRONT DOOR SCUFF PLATE LH (w/o Illumination) (See Step 88 in  INSTALLATION  ) 
  8. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Illumination) (See Step 90 in  INSTALLATION  ) 
  9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  10. PERFORM INITIALIZATION 

    Some systems need initialization after reconnecting the cable to the negative battery terminal (See INITIALIZATION ).

  11. INSPECT SRS WARNING LIGHT 

    (See PROBLEM SYMPTOMS TABLE )

About FixVault