FixVault
Home › Kia › 2007 › Magentis 2.4 3 › Repair and Diagnosis › External Pages › Different car › Section 54 (Cruise Control) › Cruise Control Main Switch › Removal

Cruise Control Main Switch: Removal

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation (See AIRBAG SYSTEM ).
  2. REMOVE NO. 2 LOWER STEERING WHEEL COVER 
  3. REMOVE NO. 3 LOWER STEERING WHEEL COVER 
  4. REMOVE STEERING PAD (See  REMOVAL  ) 
  5. REMOVE CRUISE CONTROL MAIN SWITCH 
    1. Disconnect the connector.
    2. Remove the 2 screws and the cruise control main switch.
    Fig 1: Identifying 2 Screws Of Cruise Control Main Switch
    G04049286Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault