FixVault
Home › Kia › 2007 › Magentis 2.4 3 › Repair and Diagnosis › External Pages › Different car › Section 61 (Navigation) › Navigation Ecu › Installation

Navigation Ecu: Installation

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL NAVIGATION ECU 
    1. Install the navigation ECU with the 4 bolts.
      Fig 1: Identifying Navigation ECU With Bolts
      G04050539Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Connect the connectors.
  2. INSTALL MULTI-DISPLAY ASSEMBLY 
  3. INSTALL NO. 2 RADIO BRACKET (See  INSTALLATION  ) 
  4. INSTALL NO. 1 RADIO BRACKET (See  INSTALLATION  ) 
  5. INSTALL MULTI-DISPLAY WITH RADIO RECEIVER ASSEMBLY (See  INSTALLATION  ) 
  6. INSTALL CENTER LOWER INSTRUMENT CLUSTER FINISH PANEL (See  INSTALLATION  ) 
  7. INSTALL NO. 3 INSTRUMENT PANEL REGISTER ASSEMBLY (See  INSTALLATION  ) 
  8. INSTALL CONSOLE BOX (See  INSTALLATION  ) 
  9. INSTALL CONSOLE BOX REGISTER ASSEMBLY (See  INSTALLATION  ) 
  10. INSTALL FRONT ASH RECEPTACLE SUB-ASSEMBLY (See  INSTALLATION  ) 
  11. INSTALL FRONT CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) (See  INSTALLATION  ) 
    Fig 2: Identifying Navigation ECU Connectors
    G04050540Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. INSTALL REAR CONSOLE PANEL SUB-ASSEMBLY (for Manual Transmission) (See  INSTALLATION  ) 
  13. INSTALL CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transmission) (See  INSTALLATION  ) 
  14. INSTALL UPPER NO. 2 CONSOLE PANEL GARNISH (for Automatic Transmission) (See  INSTALLATION  ) 
  15. INSTALL UPPER NO. 1 CONSOLE PANEL GARNISH (for Automatic Transmission) (See  INSTALLATION  ) 
  16. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) 
  17. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transmission) 
  18. INSERT MAP DISC 
    1. Remove the clock assembly
    2. Turn the engine switch on (ACC).
    3. Insert the map disc.
      Fig 3: Identifying Clock Assembly
      G04050541Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Check that the wire harness is in the position shown in the illustration.
      Fig 4: Checking Wire Harness Is In Position
      G04050542Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Install the clock assembly.
  19. ADJUST CLOCK 
Fig 5: Identifying Clock
G04050543Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
About FixVault