FixVault
Home › Kia › 2007 › Magentis 2.7 4 › Repair and Diagnosis › External Pages › Different car › Section 51 (Multiplex Communication) › Multiplex Communication System › DTC Check/Clear

DTC Check/Clear

WARNING: This page is about a different car, the 2006 Lexus IS 350 and 2006 Lexus IS 250. However, it is still accessible from the selected car via links, so may be relevant.
  1. CHECK DTC 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Enter the following menus: DIAGNOSIS/OBD/ MOBD/BODY/DTC INFO.
    4. Check the DTCs on the tester screen.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

    Fig 1: Connecting Intelligent Tester To DLC3
    G04049682Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. CLEAR DTC 
    1. Connect the intelligent tester to the DLC3.
    2. Turn the engine switch on (IG).
    3. Erase the DTCs by following the prompts on the tester screen.
    4. Enter the following menus: DIAGNOSIS/OBD/ MOBD/BODY/DTC INFO.

      HINT:

      Refer to the intelligent tester operator's manual for further details.

About FixVault