FixVault
Home › Kia › 2007 › Optima EX, 2.4 3 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › ETACS (Electronic Time And Alarm Control System › Body Control Module › Replacement

Body Control Module: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (Refer to the CRASH PAD ).
  3. Remove the keyless antenna cable and body control module (A) after loosening 2 nuts.
    Fig 1: Identifying Body Control Module
    G04806380Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault