FixVault
Home › Kia › 2007 › Rio Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 8 (Abs (Anti-Lock Brake System)) › Scan Tool Check › Notes

Scan Tool Check: Notes

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF.
  2. Connector the Scan tool to the 16P data link connector located the driver's side kick panel.
    Fig 1: Connecting HI-Scan Pro Connector To Data Link Connector
    G04883732Courtesy of KIA MOTORS AMERICA, INC.
  3. Turn the ignition switch ON.
  4. Check for DTC using the Scan tool
  5. After completion trouble of the repair or correction of the problem, erase the stored fault codes using the scan tool.
  6. Disconnect the Scan tool from the 16P data link connector.
About FixVault