FixVault
Home › Kia › 2007 › Rio Base, Standard › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Interior › Crash Pad › Replacement › Audio Assembly Replacement

Audio Assembly Replacement

  1. Remove the center facia panel (See CLUSTER FACIA PANEL REPLACEMENT  ).
  2. Loosen the screws.
  3. Disconnect the audio connector and antenna cable, then remove the audio assembly (A).
    Fig 1: Identifying Audio Assembly
    G04863405
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
About FixVault