FixVault
Home › Kia › 2007 › Rio Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 8 (Abs (Anti-Lock Brake System)) › Diagnostic Trouble Code Chart(DTC) › DTC C1702 Variant Coding Error › Monitor SCANTOOL Data › Variant Code

Variant Code

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check for improper installation of PCM (ECM & TCM)/ESC.
  2. Connect scantool to Data Link Connector(DLC).
  3. Ignition "ON".
  4. Go in Anti-Lock brake system (figure 1).
  5. Perform variant code.
  6. Disconnect scantool.
  7. Ignition "OFF" and then ignition "ON". Go to "COMPONENT INSPECTION " Procedure.
Fig 1: Scan Tool Display - Current Data
G04883893Courtesy of KIA MOTORS AMERICA, INC.
About FixVault