Service Standard
SERVICE STANDARD SPECIFICATIONS
| Items | Standard value [in (mm)] |
|---|---|
| Input shaft rear bearing end play | 0.00-0.0019L (0.00-0.05L) |
| Output shaft bearing end play (At 70kgf load) | 0.0019T-0.0039T (0.05T-0.10T) |
| Input shaft front bearing end play (At 70kgf load) | 0.00-0.0019L (0.00-0.05L) |
| Differential bearing end play | 0.0059T-0.0078T (0.15T-0.20T) |
| Differential pinion backlash | 0.001L-0.0039L (0.025L-0.10L) |
| T: Indicate tightening of - (minus) direction of end play | |
| L: Indicate loosening of + (plus) direction of end play | |