FixVault
Home › Kia › 2007 › Rondo Base › Repair and Diagnosis › Brakes › Traction Control › Abs (Anti-Lock Brake System) › Problem Symptoms Table › ABS Does Not Operate › Inspection Procedures › DTC Inspection

DTC Inspection

  1. Connect the scan tool with the data link connector and turn the ignition switch ON.
  2. Verify that the normal code is output. Is the normal code output?

    NO 

    • Check the power source circuit.

    YES 

    • Erase the DTC and recheck using scan tool.
About FixVault