FixVault
Home › Kia › 2007 › Rondo Base › Repair and Diagnosis › Electrical › Body Electrical › Body Electrical System › Lighting System › Turn Signal Lamp › Removal

Turn Signal Lamp: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Loose the screws (3EA) holding the rear combination lamp then disconnect the connector then remove the outside rear combination lamp (A).
    Fig 1: Identifying Outside Rear Combination Lamp With Screws
    G05188005Courtesy of KIA MOTORS AMERICA, INC.
  3. Replace the bulbs after disconnecting the rear combination lamp assembly.
    Fig 2: Identifying Rear Combination Lamp Assembly With Bulbs
    G05188006Courtesy of KIA MOTORS AMERICA, INC.
About FixVault