FixVault
Home › Kia › 2007 › Rondo Base › Repair and Diagnosis › Engine Performance › Engine Control Systems › Gasoline Engine Control System (G4KC - GSL 2.4L) › Engine Control System Components › Etc (Electronic Throttle Control) System › Inspection › Component Inspection › Throttle Position Sensor (TPS)

Throttle Position Sensor (TPS)

  1. Connect a scan tool on the Data Link Connector (DLC).
  2. Start engine and check output voltages of TPS 1 and 2 at C.T and W.O.T.

    Specification: Refer to SPECIFICATION .

  3. Turn ignition switch OFF and disconnect the scan tool from the DLC.
  4. Disconnect ETC module connector and measure resistance between ETC module terminals 1 and 2.

    Specification: Refer to SPECIFICATION .

About FixVault