FixVault
Home › Kia › 2007 › Rondo EX, 2.7 4 › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle Control System (A5GF1) › Input Speed Sensor › Removal

Input Speed Sensor: Removal

  1. Remove the battery terminal.
  2. Remove the battery and battery tray.
  3. Remove the air cleaner assembly. Refer to AUTOMATIC TRANSAXLE .
  4. Remove the input shaft speed sensor connector.
  5. Remove the input shaft speed sensor (A).
    Fig 1: Locating Input Shaft Speed Sensor
    G05116851Courtesy of KIA MOTORS AMERICA, INC.
About FixVault