FixVault
Home › Kia › 2007 › Sedona Base › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control Main Switch › Removal And Installation

Removal And Installation

  1. Disconnect the battery (-) terminal.
  2. Remove the driver side air bag module. (Refer to AIR BAG MODULE (DRIVER SIDE) ).
  3. Disconnect the cruise control switch connector and then remove the cruise control switch (A) with two screws.
    Fig 1: Identifying Cruise Control Switch
    G04804053Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault