Latch Switch: Inspection: Notes

Check the power sliding door control module input/output value by using the diagnostic tool.
When checking the latch, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.

Fig 1: Identifying Scan Tool Display - POWER SLIDING/TAILGATE
Courtesy of KIA MOTORS AMERICA, INC.
Select the "POWER SLIDING DOOR".

Fig 2: Identifying Scan Tool Display - POWER SLIDING LH
Courtesy of KIA MOTORS AMERICA, INC.
Select the sensor output. And then check the unlatch feedback (Unlocked state) voltage while operating power sliding door in power mode.

Fig 3: Identifying Scan Tool Display - UNLATCH F/BACK
Courtesy of KIA MOTORS AMERICA, INC.

* Above voltage and numerical value may be different from the real value.
If there is no change in voltage, change the latch.