DTC C1275 G-Sensor Range/Performance Error: DTC Detecting Condition

POSSIBLE CAUSE REFERENCE

Item		Detecting Condition	Possible cause
DTC Strategy		Signal monitoring	Improper installation of G-Sensor Abnormal Rotor and wheel bearing Faulty G-Sensor
Case 1	Monitoring Period	Continuous (If no under voltage, no BLS, no BLS failure is detected)
Case 1	Enable Conditions	If the G sensor signal is more than 0.4G for more than 20sec.
Case 2	Monitoring Period	Continuous (If no under voltage, no ABS control)
Case 2	Enable Conditions	the difference between measured longitudinal acceleration and longitudinal acceleration by differentiating vehicle speed exceeds the threshold (Approx. 1.5G). a fault is recognized after 2s.
Fail Safe		ABS function is inhibited, EBD function is allowed and the ABS warning lamps are activated.