FixVault
Home › Kia › 2007 › Sorento Base, A5SR2 › Repair and Diagnosis › Electrical › Body Electrical › Body Electrical System › Immobilizer Control System › DTC P1698 Invalid TP (TP Has Different Pin) › Monitor Scan Tool Data

Monitor Scan Tool Data

  1. Ignition "ON" & Engine "OFF"
  2. After connecting scan tool, Monitor the DTCs and CURRENT DATA to check key status.
    Fig 1: Scan Tool Display - TRANSPONDER INVALID
    G05119848Courtesy of KIA MOTORS AMERICA, INC.
  3. Are DTSs and CURRENT DATA displayed as above?

    YES  : If key status is "invalid" is displayed, check transponder (key) and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NOTE:
    1. Be sure that P1698 is displayed, when transponder (key) is unintentionally exchanged with another key.
    2. Be sure that P 1698 is displayed, when using virgin transponder (key) with learned ICU.
    3. Be sure that P1698 is displayed by abnormal stop when key teaching is performed by learnt key (with same PIN code)

    NO  : Fault is intermittent caused by poor contact in the ICU and/or the antenna coil connector or was repaired and ICU memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

    Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

About FixVault