Heater Control Unit Replacement

WARNING: This page is about a different car, the 2007 Kia Rio5, 2007 Kia Rio, 2006 Kia Rio5, and 2006 Kia Rio. However, it is still accessible from the selected car via links, so may be relevant.

Remove the center lower tray (A).

Fig 1: Identifying Center Lower Tray
After loosen the center facia lower panel mounting screw, remove the center facia lower panel (A). Disconnect the heater control unit connector (B).

Fig 2: Identifying Center Facia Lower Panel And Heater Control Unit Connector
Disconnect the heater control cable (A).

Fig 3: Identifying Heater Control Cable
Loosen the heater control unit mounting screw. Remove the heater control unit (A).

Fig 4: Identifying Heater Control Unit And Mounting Screw
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.