FixVault
Home › Kia › 2008 › Magentis 2.4 3 › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › ETACS (Electronic Time And Alarm Control System) › Body Control Module › Replacement

Body Control Module: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel. Refer to CRASH PAD .
  3. Remove the keyless antenna cable and body control module (A) after loosening 2 nuts.
    Fig 1: Locating Body Control Module
    G04806380Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault