Audio Assembly Replacement

WARNING: This page is about a different car, the 2008 Kia Optima and 2008 Kia Magentis. However, it is still accessible from the selected car via links, so may be relevant.

Remove the CENTER FASCIA PANEL .
Loosen the screws.
Disconnect the audio connector and antenna cable, then remove the audio assembly (A).

Fig 1: Identifying Audio Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Disconnect the cluster connector (A), then remove the audio assembly (B).

Fig 2: Identifying Cluster Connector And Audio Assembly
Courtesy of KIA MOTORS AMERICA, INC.
Installation is the reverse of removal.
NOTE:
- Make sure the connector are plugged in properly.