FixVault
Home › Kia › 2008 › Rio Base, Automatic › Repair and Diagnosis › Suspension › Front Suspension › Front Axle › Front Hub/Knuckle › Disassembly

Front Hub/Knuckle: Disassembly

  1. After removing the fixed screws (A) mounting the brake disc (C), remove the brake disc (C) from the hub (B).
    Fig 1: Identifying Brake Disc From Hub
    G04862756Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the snap ring (A).
    Fig 2: Identifying Snap Ring
    G04862757Courtesy of KIA MOTORS AMERICA, INC.
  3. Install the special tools (09517-29000, 09517-21500) as shown in illustration below.
    Fig 3: Identifying Special Tools (09517-29000, 09517-21500)
    G04862758Courtesy of KIA MOTORS AMERICA, INC.
  4. Separate the hub from the knuckle by turning nut (A) of the special tool (09517-21500).
  5. Using a plastic hammer, remove the dust cover from the knuckle.
  6. Remove the bearing inner race (B) from the hub (A) using the special tool (09495-33000).
    Fig 4: Identifying Bearing Inner Race From Hub
    G04862759Courtesy of KIA MOTORS AMERICA, INC.
  7. Using the special tools (09495-33100,09517-29000), remove the wheel bearing outer race (A) from the knuckle (B).
    Fig 5: Identifying Wheel Bearing Outer Race And Knuckle
    G04862760Courtesy of KIA MOTORS AMERICA, INC.
About FixVault