Brake Pedal: Installation

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Installation is the reverse of removal.
CAUTION: Coat the inner surface of the bushings with the specified grease.
Specified grease: LiG-2
Before inserting the pin, apply the specified grease to the clevis pin.

Fig 1: Identifying Clevis Pin
Courtesy of KIA MOTORS AMERICA, INC.
Install the snap pin.
Adjust the brake pedal height and free play. (Refer to BRAKE PEDAL BRAKE SWITCH ADJUSTMENT )
CAUTION: Before connecting trans cable, be sure that position of pivot pin (A) is initialized.

Fig 2: Identifying Pivot Pin
Courtesy of KIA MOTORS AMERICA, INC.
Install the stop lamp switch.