Master Cylinder: Reassembly

WARNING: This page is about a different car, the 2007 Kia Sedona and 2006 Kia Sedona. However, it is still accessible from the selected car via links, so may be relevant.

Apply genuine brake fluid to the rubber parts of the cylinder kit and grommets.
Carefully insert the springs and pistons in the proper direction.
Press the piston with a screwdriver (A) and install the cylinder pin (B).

Fig 1: Installing Cylinder Pin
Courtesy of KIA MOTORS AMERICA, INC.
Install the retainer ring (A) after installing primary piston assembly.

Fig 2: Installing Retainer Ring
Courtesy of KIA MOTORS AMERICA, INC.
Mount two grommets.
Install the reservoir on the cylinder.