FixVault
Home › Kia › 2008 › Sedona Base › Repair and Diagnosis › Accessories & Equipment › Communication Devices › BCM (Body Control Module) › Body Network System › Functions › Exterior Lighting Functions › Auto Light Function

Auto Light Function

  1. The Auto light function is active when the headlamp switch is positioned to `Auto' and the Key is in RUN position.

    The auto light sensor is powered on the status ACC, START and RUN of the key position. Based on the Auto light sensor values corresponding to the exterior brightness level, it controls automatically the lighting of the Park and tail lamps or/and the headlamps Low Beam depending on the country.

  2. Auto light Sensor detection table
    AUTO LIGHT SENSOR DETECTION

    Mode Tail Lamps Headlamps Low Beam
    Lux (Lux) Voltage (V) Lux (Lux) Voltage (V)
    ON < 24 ± 5.2 < 1.77 ± 0.08V Same as Tail lamps
    OFF > 48 ± 10.5 > 3.47 ± 0.1V Same as Tail lamps
About FixVault