Deployed Airbag Module Disposal Procedures

After deployment, the airbag module should be disposed of in the same manner as any other scrap part, except that the following points should be carefully noted during disposal.

1. The inflator will be quite hot immediately following deployment, so wait at least 30 minutes to allow it to cool before attempting to handle it,
2. Do not put water or oil on the airbag after deployment.
3. There may be adhered to the deployed airbag module, material that could irritate the eyes and/or skin, so wear gloves and safety glasses when handling a deployed airbag module. If despite these precautions, the material does get into your eyes or on your skin, immediately rinse the affected area with a large amount of clean water, If any irritation develops, seek medical attention.
4. Tightly seal the airbag module in a strong vinyl bag for disposal.
   Fig 1: Sealing Airbag Module In Vinyl Bag

   Courtesy of KIA MOTORS AMERICA, INC.
5. Be sure to always wash your hands after completing this operation.