FixVault
Home › Kia › 2009 › Borrego Limited, 4WD › Repair and Diagnosis › Body & Frame › Ignition Switch/Steering Lock › Button Engine Start System › PDM (Power Distribution Module) › Repair Procedures › Removal

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). (Refer to "CRASH PAD ")
    Fig 1: Identifying Crash Pad Lower Panel
    G06365607Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the power distribution module connector installed on the right bracket side of steering shaft.
  4. Remove the power distribution module (A) after loosening a bolt and nut.
    Fig 2: Identifying Power Distribution Module
    G06365608Courtesy of KIA MOTORS AMERICA, INC.
About FixVault