FixVault
Home › Kia › 2009 › Borrego Limited, 4WD › Repair and Diagnosis › Restraints › Restraints Control Systems › SRS Control Module (SRSCM) › B1620 Internal fault-Replace SRSCM › Monitor Scantool Data

Monitor Scantool Data

  1. Ignition "OFF", connect scantool.
  2. Ignition "ON" & Engine "OFF", select "Diagnostic Trouble Codes (DTC) " mode.
  3. Monitor diagnostic trouble code and present of trouble code.
  4. Using a scan tool, clear the DTC.
    Fig 1: Scan Tool Display - DTC Mode
    G06368286Courtesy of KIA MOTORS AMERICA, INC.
  5. Is DTC present problem?

    YES 

    • Internal fault of SRSCM. Substitute with a SRSCM and check for proper operation. If the problem is corrected, replace SRSCM and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
      NOTE: If you strike or spin the SRSCM at the IG "ON" state, the seat-belt pretensioner, curtain-airbag or side-airbag could be deployed and bring on danger. Handle it with care.
About FixVault