FixVault
Home › Kia › 2009 › Borrego Limited, 4WD › Repair and Diagnosis › Restraints › Restraints Control Systems › SRS Control Module (SRSCM) › Front Impact Sensor (FIS) › Repair Procedure › Removal

Repair Procedure: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures described previously.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector (s) .
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the radiator upper cover. (Refer to FRONT BUMPER )
  3. Disconnect the Front Impact Sensor connector.
  4. Remove the Front Impact Sensor mounting nut.
    Fig 1: Identifying Front Impact Sensor Connector
    G06368110Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the Front Impact Sensor.
About FixVault