Repair Procedures: Toe: [Front]: Notes
Toe-in(B-A or angle a+b) is adjusted by turning the tie rod turnbuckles. Toe-in on the left front wheel can be reduced by turning the tie rod toward the rear of the car. Toe-in change is adjusted by turning the tie rods for the right and left heels simultaneously at the same amount as follows.
Standard value :
Toe-in
Total : 0°±0.2°
Individual : 0°± 0.1°
NOTE:
- Toe-in adjustment should be made by turning the right and left tie rods at the same amount.
- When adjusting toe-in, loosen the outer bellows clip to prevent twisting the bellows.
- After the adjustment, tighten the tie rod end lock nuts firmly and reinstall the bellows clip.
- Adjust each toe-in to be the range of ±0.1°.
Tie rod(A) Specified torque Nm (kgf.m, lb-ft) :
49.0 ~ 53.9 (5.0 ~ 5.5, 36.2 ~ 39.8)