General Information: DTC Detecting Condition
DTC DETECTING CONDITION CHART
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Open or short in TRANSAXLE RANGE SWITCH
- Faulty TRANSAXLE RANGE SWITCH
- Faulty PCM
|
| Enable Conditions |
- Engine State = RUN
- Battery Voltage> 11V and < 16 V
|
| Threshold Value |
- Number of active PRNDL SW signal>= 2
|
| Diagnostic Time |
|
| Fail Safe |
- Recognition as previous signal
- When signal is input "D" and "N" at the same time, TCM regards it as "N" RANGE.
- After PCM/TCM Reset, If the if the PCM/TCM detects multiple signal or no signal, then it holds the 3rd gear position.
|