Front Hub/Knuckle: Installation

Installation is reverse of the removal.
Install the strut assembly (A) and the drive shaft (B) in the knuckle.
Tightening torque N.m (kgf.m, lb-ft) :

100-120 (10-12, 72-86)

Fig 1: Identifying Strut Assembly And Drive Shaft
Courtesy of KIA MOTORS AMERICA, INC.
Install the lower arm assembly mounting bolts (A) to the knuckle.
Tightening torque N.m (kgf.m, lb-ft) :

100-120 (10-12, 72-86)

Fig 2: Identifying Lower Arm Mounting Bolts
Courtesy of KIA MOTORS AMERICA, INC.
Install the wheel speed sensor (A) to the knuckle (B).

Fig 3: Identifying Wheel Speed Sensor To Knuckle
Courtesy of KIA MOTORS AMERICA, INC.
Install the brake caliper assembly (A) to the knuckle (B).
Tightening torque N.m (kgf.m, lb-ft):

80-100 (8-10, 58-72)

Fig 4: Identifying Brake Caliper Assembly And Knuckle
Courtesy of KIA MOTORS AMERICA, INC.
Install the tie rod end ball joint nut (A) and insert the split pin.
Tightening torque N.m (kgf.m, lb-ft) :

16-34 (1.6-3.4, 12-25)

Fig 5: Identifying Tie Rod Ball Joint Nut
Courtesy of KIA MOTORS AMERICA, INC.
Insert the washer (B) and tighten the locking nut (A).
Tightening torque Nm (kgf.m, lb-ft) :

200-260 (20-26, 145-188)
Insert the split pin (C).

Fig 6: Identifying Lock Nut And Split Pin
Courtesy of KIA MOTORS AMERICA, INC.
Install the wheel and tire and tighten the wheel nuts.