FixVault
Home › Kia › 2009 › Rio Base, Standard › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control Switch › Repair Procedure › Inspection › Measuring Resistance

Measuring Resistance

  1. Disconnect the cruise control switch connector from the control switch.
    Fig 1: Identifying Cruise Control Switch Connector
    G06405618Courtesy of KIA MOTORS AMERICA, INC.
  2. Measure resistance between terminals on the control switch when each function switch is ON (switch is depressed).
    RESISTANCE SPECIFICATION

    Function switch Terminal Resistance
    CANCEL 6-7 0Ω
    SET - 6-7 220Ω ± 1%
    RES + 6-7 910Ω ± 1%
    ON/OFF 7-8 3900Ω ± 1%
  3. If not within specification, replace switch.
About FixVault