FixVault
Home › Kia › 2009 › Rio LX, Standard › Repair and Diagnosis › Transmission › Transmission Control Systems › Manual Transaxle Control System (From 11.19.2008) › Back-Up Lamp Switch › Repair Procedure › Replacement

Repair Procedure: Replacement

  1. Disconnect the back up lamp switch connector.
    Fig 1: Identifying Back Up Lamp Switch Connector
    G06405679Courtesy of KIA MOTORS AMERICA, INC.
  2. Remove the back up lamp switch.
  3. Replace a new one and install the back up lamp switch, then connect the connector.

    Tightening torque:  30-35 N.m (3.0-3.5 kgf.m, 21.7-25.3 lb-ft)

About FixVault