FixVault
Home › Kia › 2009 › Rondo EX, 2.7 4 › Repair and Diagnosis › Body & Frame › Windows › Interior › Crash Pad › Repair Procedures › Replacement › Heater Control Unit Replacement

Heater Control Unit Replacement

  1. Remove the center fascia panel.
  2. After loosening the heater control mounting screws, remove the heater control unit (A).
    Fig 1: Identifying Heater Control Unit With Mounting Screws
    G06385329Courtesy of KIA MOTORS AMERICA, INC.
  3. Installation is the reverse of removal.
    NOTE: Make sure the connector is plugged in properly
About FixVault