FixVault
Home › Kia › 2009 › Rondo EX, 2.7 4 › Repair and Diagnosis › Restraints › Air Bag, SRS › Airbag Module › Driver Airbag (DAB) Module And Clock Spring › Removal

Driver Airbag (DAB) Module And Clock Spring: Removal

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the airbag module mounting bolts (2EA).
    Fig 1: Identifying Airbag Module Mounting Bolts
    G06386733Courtesy of KIA MOTORS AMERICA, INC.
  3. Disconnect the horn connector (A).
  4. Release the connector locking pin, then disconnect the driver airbag module connector (B).
    CAUTION: The removed airbag module should be stored in a clean, dry place with the pad cover face up.
    Fig 2: Identifying Horn Connector & Driver Airbag Module Connector
    G06386734Courtesy of KIA MOTORS AMERICA, INC.
  5. Remove the steering wheel and steering wheel column cover. (Refer to STEERING COLUMN & SHAFT ).
  6. Disconnect the clock spring and horn connector, then remove the clock spring.
    Fig 3: Disconnecting Clock Spring & Horn Connector
    G06386735Courtesy of KIA MOTORS AMERICA, INC.
About FixVault