FixVault
Home › Kia › 2009 › Rondo LX, 2.4 8 › Repair and Diagnosis › Restraints › Restraints Control Systems › SRS Control Module › Seat Belt Buckle Switch (BS) › Repair Procedure › Removal

Repair Procedure: Removal

  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front seat assembly. (Refer to FRONT SEAT )
  3. Loosen the seat belt buckle mounting bolt and remove the seat belt buckle switch.
    Fig 1: Identifying Seat Belt Buckle Mounting Bolt
    G06385148Courtesy of KIA MOTORS AMERICA, INC.
About FixVault