FixVault
Home › Kia › 2009 › Sedona Base › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control Main Switch › Removal And Installation

Removal And Installation

  1. Disconnect the battery (-) terminal.
  2. Remove the driver side air bag module. Refer to AIR BAG MODULE (DRIVER SIDE) .
  3. Disconnect the cruise control switch connector and then remove the cruise control switch (A) with two screws.
    Fig 1: Identifying Cruise Control Switch
    G04804053Courtesy of KIA MOTORS AMERICA, INC.
  4. Installation is the reverse of removal.
About FixVault