FixVault
Home › Kia › 2009 › Sedona Base › Repair and Diagnosis › Body & Frame › Seats › IMS (Integrated Memory System) › IMS Power Seat Control › Operation › Memory Storage Operation By Keyless

Memory Storage Operation By Keyless

  1. If "ID1" or "ID2" is received during keyless lock operation, record seat and pedal position in keyless code, (there is no buzzer output during memory storage operation by keyless)
  2. Memory storage operation is allowed for a single ID after a change of IG from "on" → "off".
  3. Any one of the following conditions will prevent keyless Memory storage operation.
    • When "P" position switch is not on.
    • When Vehicle Speed in CAN BUS data transmitted from CLUSTER is "3km/h" or faster.
    • When seat and pedal is manipulated by CAN BUS and manual switch.
    • When IG transmitted from IPM is other than off.
About FixVault