FixVault
Home › Kia › 2009 › Sedona Base › Repair and Diagnosis › Body & Frame › Seats › Power Seats › Power Seat Switch › Replacement

Power Seat Switch: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the door trim panel. Refer to FRONT DOOR .
  3. Remove the switch connector (16 pin) from the wiring harness, and then loosen the mounting screws (3 EA).
    Fig 1: Identifying Power Seat Switch And Mounting Screws
    G04885138Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the switch from the front door panel.
  5. Installation is the reverse of removal.
About FixVault